Good employment practices include ensuring that employees are aware of the risks associated with their work. As a standard procedure, prior to determining which PPE must be worn, the employer must have a legally required Risk Inventory and Evaluation (RI&E) of the work activities conducted. As part of this process, task-specific risk analyses identify which PPE can provide the appropriate protection. If any residual risks remain, a separate assessment is conducted to determine the additional PPE requirements needed to address them.

To ensure worker safety and prevent accidents, international standards have been established to regulate the quality and performance of personal protective equipment (PPE), work clothing, and safe work practices. These standards, known as EN ISO standards, were developed by the European Commission (CEN) and the International Organization for Standardization (ISO) to provide a harmonized framework for the protection of workers across various industries.

This article consists of three sections. To keep things organized, here are the sections:

Safety gloves, hereinafter referred to as work gloves, are designed to protect the hands, wrists, and forearms. After reading this knowledge base article, you’ll have a better understanding of safety gloves.

Respiratory protection is a type of personal protective equipment (PPE) designed to provide protection against risks with potentially serious consequences. Under the new European Regulation 2016/425 on personal protective equipment (PPE), respiratory protection remains classified in Category 3. This is why strict requirements are imposed on production control, conformity assessment procedures, and quality assurance. In particular, accurate information, the right choice, and proper use ensure protection and prevent serious injury.

Noise-induced hearing loss is a permanent condition that leads to increasing social isolation and has a growing societal impact due to impaired cognitive functioning. 

Must provide adequate protection against risks, hazards, and the possibility of injury that may arise from the work. Clothing must fit properly, be comfortable, and allow for sufficient freedom of movement. The Risk Inventory and Evaluation (RI&E) must specify which selection criteria and level of protection have been chosen. Based on this information, both permanent and temporary employees can be properly informed about the use of PPE.

An industrial safety helmet (NEN EN 397 standard) is used to prevent head injuries. All safety helmets that comply with NEN EN 397 are also CE-type approved. A safety helmet must fit well and be securely fastened to the head. The helmet must be lightweight, and the outer shell must be smooth and seamless.  

No work without safety shoes. Safety shoes must fit properly to prevent musculoskeletal issues, and the models must be appropriately tailored to the identified risks. All Safety can advise you.

Eye protection is designed to protect the eyes from mechanical, physical, and/or chemical injury and to maintain clear vision while working. It is important that the design of safety glasses adequately protects our vulnerable eyes to prevent damage and potential loss of vision.